ESXI 7.0手動安裝

要到BIOS確認開啟要開CPU虛擬化與多線程

1.先到官網下載ISO鏡像
https://customerconnect.vmware.com/cn/downloads/info/slug/datacenter_cloud_infrastructure/vmware_vsphere/7_0#product_downloads

2.掛載ISO

3.進入CD/ROM安裝

4.開始安裝，等他跑

5.設定安裝配置

• Welcom to the VMware ESXI 7.0.3 installation
• Continue
• End User License Agreenent
• Accept and Continue
• Scanning
• 等待
• Select to Disk ti Install or Upgrade
• 選擇硬碟 > Continue
• ESXi Found
• 選 Install (要按空白選擇) > OK
• Please select a keyboard Layout
• US Default > Continue
• Enter a root password
• 設定密碼 > Continue
• Error(s) / Warning Found System Scan
• Continue
• Confire Install
• Install

6.開始跑安裝

• 完成後 > Reboot

7.安裝完成後進入畫面

• 按F2進入配置
• 輸入密碼

8.配置IP

• Configure Managerment Network
• IPv4 Configuration
• Set static IPv4 address and network confguration
• IPv4 Address  154.xx.xx.xx
• Subnet Mask  255.255.255.0
• Default Gateway 154.xx.xx.xx

9.配置DNS

• DNS Configuration
• Use the following DNS server addresses and hostname:
• Primary DNS Server  8.8.8.8
• Alternate DNS Server 1.1.1.1

  ★Esc離開時選Y存檔

10.test Managerment Network

• OK  > 開始測試連網是否正常

11.使用以下網址登入

12.登入ESXI7  ，權限為系統用戶名/密碼

• https://154.xx.xx.xx

---

Reset System Configuration #選擇後會對ESXI重新設定
重設好後預設登入密碼為空白「""」